HONEY COMB WEAVE

Honeycomb Weave Fabric Structure:-

The term is applied to weaves which resemble honey comb cells. The cellular formations appear square in the cloth. They are formed by some ends and picks interlacing tighter than others and therefore developing a higher tension. Usually single cloths are made by progressively lengthening and shortening both warp and weft floats to form ridges and hollows on a square pattern, to give a cellular appearance.

Honeycomb Structure or Design or Weave:-

There are two types of honey comb weaves, such as :–

(1) Ordinary honeycomb and

(2) Brighton honeycomb.

(1) Ordinary Honeycomb:-

MAIN FEATURES:-

The main features of ordinary honeycomb are as follows –

1) Surface of produced fabric is rough.

2) Similar appearance or effect formed in both sides of the fabric.

3) In repeat size, ends and picks are equal or unequal.

4) Repeat size is multiple of two.

5) Smallest repeat size is 6 X 4.

6) One cell in each repeat.

7) V – draft or pointed draft is found.

8) Simple construction.

Construction Principle:-

The stages of constructing an ordinary honeycomb weave are as follows –

(a) Construct a 1/a Z twill starting in the bottom left-hand corner, then a similar one running in the opposite direction and starting one square down from the top left-hand corner, so that there will be a clean intersection of the twill lines, as at first stage;

(b) In one of the two diamonds produced, leave a row of stitching points and then lift the remainder of the diamond solid. This is the final weave.

The following figures show the weave plan with drafting and lifting plan of different equal and unequal repeat sizes of ordinary honey comb weaves –

fig showing drafting and weaving (peg) plan of an ordinary honeycomb weave.

This weaves is particularly suitable for hand towels, glass cloths, dispensed roller towels and bath mats.

End Uses:-

This weaves is particularly suitable for hand towels, glass cloths, dispensed roller towels and bath mats, where moisture absorption properties are particularly desired, but in similar coarse cotton qualities it is also used for quilts and soft furnishings, and in finer qualities for shirts and brocades. In conjunction with the newer textured yarns, it is produced in very coarse qualities for cellular blankets.

Brighton Honeycomb:-

MAIN FEATURES:-

Brighton honeycomb is a complex structure. The main features of Brighton honeycomb are as follows –

(1)  More honeycomb cells of varying size are produced in this weave.

(2) The fabric surface is also rough as ordinary honeycomb.

(3)When making the weave, the number of threads per repeat should always be a multiple of (i.e. 12 ends X 12 picks), whilst the longest float should always be one less than half the number of threads in the repeat (i.e. 12/2 – 1 = 5).

(4)Both sides of the fabric look the same like as ordinary honeycomb.

(5) Straight drafting system is used to produce this brighton honeycomb weave.

Construction Principle:-

The construction more complicated than the ordinary honeycomb, is illustrated by figures below, with the following stages –

(a) Construct a 1/a Z twill, starting in the bottom left-hand corner, and then construct a 1/a S twill, starting with the first warp lifts in the squares to the right and below the square in the top left-hand corner, and indicate the points on the double row of binding which are immediately adjacent to those of intersection that will allow extensive floats in the weft direction, as illustrated in the first stage;

(b)Using the points indicated in first stage as the extreme lift of the longest float, lift the remaining adjacent ends, as in second stage;

(c) Each of these warp floats now form the centre float of a diamond which can be completed. This is the final weave.

The draft of the brighton honeycomb is straight, this producing a lifting plan which is identical with the design; therefore, there is no saving of heald-shafts as is the case with the pointed or V-draft of the ordinary honey comb.

fig showing the drafting and weaving (peg) plan of a Brighton Honeycomb comb weave.

Brighton honey comb is used in similar qualities for more decorative end uses such as quilts and brocades and in some cases, hand towels and glass cloths.

End Uses:-

Although the weave is not as popular as the ordinary honeycomb, it is used in similar qualities for more decorative end uses such as quilts and brocades and in some cases, hand towels and glass cloths. It is also suitable for crockery towels.

Ref:-https://textileapex.blogspot.com